 |
300KN Rated Load Hydraulic Cable Reel Stand for 5000mm Drum Diameter and 3100mm Reel Width
Product Details:
| Place of Origin: | Ningbo, China |
| Brand Name: | Suntech |
| Certification: | ISO9001 |
| Model Number: | SI-30 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 PCS |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Plywood case, one unit per compartment |
| Delivery Time: | 3-7 days for stock orders |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 500 PCS per Month |
|
Detail Information |
|||
| Item No.: | 21343-21349 | Series: | SI Hydraulic Cable Reel Stand |
|---|---|---|---|
| Models: | SI-5, SI-10, SI-10A, SI-16, SI-20, SI-30 | Rated Load: | 50-300KN |
| Reel Diameter: | 2400-5000mm | Reel Width: | 1600-3100mm |
| Spindle Hole: | 76-200mm | Lifting: | Hydraulic Cylinder |
| Highlight: | 300KN Rated Load Cable Reel Stand,5000mm Drum Diameter Cable Drum Stand,3100mm Reel Width Hydraulic Cable Reel Stand |
||
Product Description
Lifting a loaded drum without a crane
A full cable drum is the heaviest single item on most stringing sites, and getting it off the ground is where crews lose time and backs. The SI series puts hydraulic cylinders under the reel so the drum is lifted and held at working height, and the stand then rolls on its own wheels to the next reel position. No crane, no blocking, no manual jacking.
Six entries cover rated loads from 50KN to 300KN, drum diameters up to 5000mm, widths up to 3100mm and spindle bores from 76mm to 200mm. Stand weights run from 172KG to 600KG, which is why the wheels matter as much as the hydraulics.
Catalogue rows
| Item No. | Model | Rated Load | Reel Diameter | Reel Width | Spindle Hole | Weight |
|---|---|---|---|---|---|---|
| 21346 | SI-5 | 50KN | 2400mm max | 1600mm max | 76-103mm | 172KG |
| 21347 | SI-10 | 100KN | 2700mm max | 1700mm max | 120-135mm | 230KG |
| 21348 | SI-10A | 100KN | 3400mm max | 1900mm max | 120-135mm | 230KG |
| 21349 | SI-16 | 160KN | 4000mm max | 2500mm max | 125-200mm | 325KG |
| 21343 | SI-20 | 200KN | 4000mm max | 2500mm max | 135-160mm | 450KG |
| 21344 | SI-30 | 300KN | 5000mm max | 3100mm max | 160-200mm | 600KG |
Choosing between load class and drum size
The rated load and the drum envelope are separate limits and both have to be satisfied. A 100KN stand appears twice, at 2700mm and at 3400mm maximum diameter, because the frame that carries a larger reel is a different structure at the same load. Read the reel diameter and width off the drum marking first, then confirm the load covers the conductor and reel weight together, then check the spindle bore against the drum axle.
Braking and payout control
An unbraked drum on a down slope will run faster than the puller wants, and the resulting surge shows up as a slack span or a kinked conductor. The optional foot operated brake lets the operator set payout speed and hold tension as the line feeds off. Where the site has any gradient, order the brake with the stand rather than adding it later.
Positioning the stand
Set the stand so the line leaves the drum in a straight run to the first roller. A stand placed off the line loads the reel flange and makes the drum track sideways as it turns. On soft ground, put plates under the wheels before lifting, since the load on a single wheel roughly doubles during the lift stroke.
Checks before dispatch
- Hydraulic cylinders cycled through full stroke under no load.
- Wheels and axle pins checked for free running.
- Spindle bore and drum envelope verified against the ordered item number.
- Plywood case packing, 500 PCS per month capacity, 1 PCS minimum order.
What this page does not claim
The six rows, rated loads, reel envelopes, spindle bores and weights above come from the current SI datasheet. This page does not state a lifting speed, does not claim the stand replaces a crane for drums outside the listed envelope, and does not name a certification beyond the ISO entry in the attribute table. Where a site requires a hydraulic test certificate, request it with the enquiry.
Buyer questions
Can the stand be moved with a drum loaded?
The stand is fitted with wheels for repositioning between reel positions. Confirm the site rule on moving a loaded stand before doing so, and keep the drum low while moving.
Is the brake included?
The foot operated brake is an option. State it on the order, particularly for sites with a gradient.
What drum sizes does the largest model take?
The SI-30 takes reels up to 5000mm diameter, 3100mm width and a 160-200mm spindle bore at 300KN rated load.
Trade terms?
1 PCS minimum order, L/C or T/T, 3-7 days for stock.
