 |
7000kg Hydraulic Cable Reel Stand with 45rpm Powered Axle and 2000N.m Torque for Conductor Drum Stand
Product Details:
| Place of Origin: | Ningbo, China |
| Brand Name: | Suntech |
| Certification: | ISO9001 |
| Model Number: | SIPZ-7H |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 PCS |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Plywood case, one unit per compartment |
| Delivery Time: | 3-7 days for stock orders |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 500 PCS per Month |
|
Detail Information |
|||
| Item No.: | 15151, 15152 | Series: | SIPZ Hydraulic Powered Reel Stand |
|---|---|---|---|
| Models: | SIPZ-5H, SIPZ-7H | Max Reel Weight: | 5000-7000kg |
| Coil Diameter: | 1250-2500mm | Max Coil Width: | 1400mm |
| Max Working Torque: | 1200-2000N.m | Max Speed: | 45rpm |
| Axle Diameter: | 76mm | Hydraulic Hose: | 13m |
| Weight Range: | 270-350kg | ||
| Highlight: | 7000kg Hydraulic Cable Reel Stand,45rpm Powered Cable Reel Stand,2000N.m Torque Conductor Drum Stand |
||
Product Description
A stand that turns the drum for you
On a tension stringing spread the pilot wire drum has to feed fast and evenly, and turning a loaded coil by hand does neither. The SIPZ series adds a powered axle to the reel stand: the drum is lifted hydraulically, locked, and then rotated under power at up to 45rpm with working torque up to 2000N.m. The crew sets the feed rate instead of chasing the drum.
Two entries cover coils of 1250mm to 2240mm and 1250mm to 2500mm diameter, up to 1400mm wide and up to 5000kg or 7000kg total weight. Both use a 76mm axle pin and a 13m hydraulic hose, which is long enough to reach a tractor or power pack parked clear of the reel.
Catalogue rows
| Parameter | 15151 SIPZ-5H | 15152 SIPZ-7H |
|---|---|---|
| Coil diameter | 1250-2240mm | 1250-2500mm |
| Max coil width | 1400mm | 1400mm |
| Axle hole diameter | 80-125mm | 80-125mm |
| Maximum reel weight | 5000kg | 7000kg |
| Max working torque | 1200N.m | 2000N.m |
| Max speed | 45rpm | 45rpm |
| Axle diameter | 76mm | 76mm |
| Stand weight | 270kg | 350kg |
| Hydraulic hose length | 13m | 13m |
Which of the two entries
The two rows differ in coil diameter, maximum reel weight and torque, and those three figures travel together. A 7000kg coil needs the 2000N.m drive to start it and keep it turning, so choosing the lighter stand for a heavy reel is not a saving. Take the reel weight from the drum marking, add the conductor weight already on the reel, and compare that total with the rated maximum rather than with the coil diameter alone.
Powered feed in practice
Start the drum slowly and let the puller take up the line before increasing speed. A powered stand can overrun a stationary puller, and the slack that results is what produces a kink in pilot wire. Watch the fleet angle at the first sheave: the stand should sit on the line of the pull, because a powered drum pulling sideways will load the flange. Stop the drive before changing tension settings, and keep the hydraulic hose route clear of wheels and foot traffic.
Checks before dispatch
- Hydraulic lift cycled through full stroke and checked for leaks.
- Powered axle run in both directions at low speed.
- Axle pin, lock and coil seats inspected.
- Plywood case packing, 500 PCS per month capacity, 1 PCS minimum order.
Data boundaries
The parameters above come from the current SIPZ datasheet. This page does not quote a feed rate in metres per minute, does not claim the stand suits coils outside the listed envelope, and does not state a certification beyond the ISO entry in the attribute table. Hydraulic flow and pressure requirements should be confirmed against the site power pack before the order is placed.
Buyer questions
Is the powered axle essential?
No. It is what separates this range from a gravity stand: with power feed the drum rotation is controlled rather than pulled by the line.
What reel weight can the SIPZ-7H take?
Up to 7000kg, with a 1250-2500mm coil diameter and a 1400mm maximum coil width.
Does the stand include the hydraulic power pack?
The stand is supplied with a 13m hydraulic hose to connect to the site power source. Confirm the power pack arrangement with the enquiry.
Trade terms?
1 PCS minimum order, L/C or T/T, 3-7 days for stock.
