500KN Rated Load Hydraulic Column Cable Reel Stand with 1850-2250mm Lift Range and Hand Pump Lifting

Column geometry for very heavy reels

Above 200KN the frame shape starts to matter more than the cylinder. A column stand carries the load down two vertical members into a wide base instead of spreading it across a low frame, which keeps the reel centre of gravity inside the footprint even at full height. The SIW range uses that geometry with a hand pump operating the lift, so one person can raise a loaded drum and set the working height.

Five entries run from 30KN to 500KN with height adjustment from 700mm to 2250mm, and stand weights from 147KG to 1000KG. The base is wide enough that the largest model stays planted under a 500KN load, and the height range lets a single stand serve both a low payout line and a tensioner feed height.

Model table

Catalogue item numbers are confirmed on the quotation for the model ordered, since the SIW range shares numbering blocks with other stands in the reel stand family.

Using the height range

The height range is not just about reach: it sets the payout angle. A stand set too high feeds the line down into the first roller, and the drum then has to be braked continuously; set too low, the line climbs and rubs the flange. Pick the model whose range spans the working height you actually need at the tensioner, not simply the model one load class above the reel weight.

Single operator lift

The hand pump allows the lift to be made in stages, which is safer than a single stroke: raise the drum clear of the ground, check the frame is square and the base is seated, then take it to height. Lower onto blocks before working under a raised drum, and never rely on the hydraulic circuit as a mechanical support during maintenance.

Checks before dispatch

• Cylinder cycled through the full height range under no load, checked for leaks.
• Column joints and base welds inspected.
• Height scale and load marking verified against the model.
• Plywood case packing, 500 PCS per month capacity, 1 PCS minimum order.

Limits of the data on this page

The five models, rated loads, height ranges and weights above come from the current SIW datasheet. This page does not quote a lift speed, does not claim a base area or tipping margin figure, and does not name a certification beyond the ISO entry in the attribute table. Where a site requires a structural or hydraulic test document, request it with the enquiry so it can be quoted with the stand.

Buyer questions

Can one person raise a 500KN reel?

The lift is by hand pump, which allows a single operator to raise the drum in stages. The stand itself weighs 1000KG at that size, so positioning it is a separate handling task.

Why a column rather than a low frame?

Column geometry keeps the load path vertical and the centre of gravity inside the base footprint, which is the concern at high load and full height.

What is the tallest setting?

2250mm on the SIW-50, with 1850mm as the lowest setting for that model.

Trade terms?

1 PCS minimum order, L/C or T/T, 3-7 days for stock.