 |
25KN Rated Load Insulated Wire Gripper Come Along Clamp with 20-24mm Jaw and 3.4KG Alloy Body
Product Details:
| Place of Origin: | Ningbo, China |
| Brand Name: | Suntech |
| Certification: | ISO9001 |
| Model Number: | SKN-4 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 PCS |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Plywood case, one unit per compartment |
| Delivery Time: | 3-7 days for stock orders |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 800 PCS per Month |
|
Detail Information |
|||
| Item No.: | 14201-14204 | Series: | SKN Insulated Conductor Gripper |
|---|---|---|---|
| Models: | SKN-1, SKN-2, SKN-3, SKN-4 | Applicable Conductor: | JKLYJ Insulated Wire |
| OD Range: | 10-24mm | Rated Safe Load: | 7-25KN |
| Weight Range: | 1.2-3.4KG | Body Material: | High Strength Aluminium Alloy |
| Highlight: | 25KN Rated Load Insulated Wire Gripper,20-24mm Jaw Come Along Clamp,3.4KG Alloy Body Conductor Gripper |
||
Product Description
Four sizes, one working principle
The SKN series is a size stepped family of insulated conductor grips. Each size is built around a defined outside diameter window, so a crew working a distribution route can match the clamp to the conductor instead of forcing one tool across a range it was not designed for. The four entries run from 10mm to 24mm outside diameter and from 7KN to 25KN rated safe load.
Size table
| Item No. | Model | Conductor Type | Max Applicable OD | Rated Safe Load | Net Weight |
|---|---|---|---|---|---|
| 14201 | SKN-1 | JKLYJ insulated wire | 10-14mm | 7KN | 1.2KG |
| 14202 | SKN-2 | JKLYJ insulated wire | 14-18mm | 15KN | 1.8KG |
| 14203 | SKN-3 | JKLYJ insulated wire | 18-22mm | 22KN | 2.6KG |
| 14204 | SKN-4 | JKLYJ insulated wire | 20-24mm | 25KN | 3.4KG |
Why the windows overlap by one step
The OD windows overlap deliberately at the boundary. A conductor measuring 20mm sits inside both the SKN-3 and SKN-4 windows, and the choice then comes down to the tension the section will carry: pick the clamp whose rated safe load covers the calculated pull with margin, not the smallest clamp that closes on the wire. Weight rises with size from 1.2KG to 3.4KG, which matters on a long arm or a pole top where the tool is held one handed.
On the pole
Seat the cable in the jaw until the sheath is fully inside the contact length, close the clamp, and take up the slack by hand before the puller loads the line. A clamp that starts a pull already skewed will load one jaw edge first, and that is where insulation damage begins. After the pull, release tension before opening the jaw, then wipe the jaw faces: sheath compound transfers onto the teeth and reduces grip on the next job.
Dispatch routine
- Jaw travel checked through the full opening window for the size.
- Load rating and size window stamped and verified against the item number.
- Net weight checked against the table for the ordered size.
- Plywood case packing, 800 PCS per month capacity, 1 PCS minimum order.
Limits of this page
The four item numbers, diameter windows, rated safe loads and net weights above are taken from the current SKN datasheet. This page does not quote a percentage weight reduction against carbon steel tools, does not claim universal fit across insulated conductor makes, and does not assert a certification beyond the ISO entry in the attribute table. Where a client specification requires a proof load certificate, request it with the enquiry.
Frequent questions
My conductor measures 18mm, which model?
18mm falls in both the SKN-2 and SKN-3 windows. Choose on rated safe load against the section tension.
Does the jaw cut into the sheath?
The contact profile is corrugated and parallel rather than a cutting tooth. Sheath condition depends on full jaw contact and on not parking the clamp under sustained load.
Is there a bare conductor version?
This series is specified for JKLYJ insulated wire. Ask our desk about the bare wire range if the project mixes both.
Trade terms?
1 PCS minimum order, L/C or T/T, 3-7 days for stock.
