 |
Anti Twist Steel Rope Gripper Come Along Clamp for 13-16mm Flat Braided Rope with 50KN Rated Load
Product Details:
| Place of Origin: | Ningbo, China |
| Brand Name: | Suntech |
| Certification: | ISO9001 |
| Model Number: | SKS-5 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 PCS |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Plywood case, one unit per compartment |
| Delivery Time: | 3-7 days for stock orders |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 800 PCS per Month |
|
Detail Information |
|||
| Item No.: | 14211-14213 | Series: | SKS Anti Twist Steel Rope Gripper |
|---|---|---|---|
| Models: | SKS-2, SKS-3, SKS-5 | Rope Range: | 9-16mm Flat Or Square Profile |
| Rated Safe Load: | 20-50KN | Weight Range: | 2.5-6.5KG |
| Body Material: | Drop Forged Alloy Steel | ||
| Highlight: | Anti Twist Steel Rope Gripper,13-16mm Come Along Clamp,50KN Rated Load Come Along Clamp |
||
Product Description
Built for flat braided pilot rope
An anti twisting pilot rope is not round, and a round-jaw clamp will let it roll. Once a flat braided rope rolls in the jaw, the grip area drops and the clamp starts to walk along the rope under tension. The SKS gripper uses a rectangular parallel cavity cut to the rope's flat profile, so the load is taken as a face contact rather than a line contact on the rope edge.
Three catalogue entries cover flat or square profile rope from 9mm to 16mm at rated safe loads of 20KN, 30KN and 50KN. Bodies are drop forged alloy steel, and the frame carries a pulling eye at the rear for the haul line.
Model table
| Item No. | Model | Max Applicable Rope Size | Rated Safe Load | Net Weight |
|---|---|---|---|---|
| 14211 | SKS-2 | 9-11mm flat or square profile | 20KN | 2.5KG |
| 14212 | SKS-3 | 11-13mm flat or square profile | 30KN | 3.5KG |
| 14213 | SKS-5 | 13-16mm flat or square profile | 50KN | 6.5KG |
Matching clamp to rope
- Measure the rope across its flat face, not across the corners; the cavity is cut to the face dimension.
- Keep the rope size in the middle of the clamp window where possible, since a rope at the extreme still grips but with less contact margin.
- Check the rated safe load against the pilot rope tension for the section, and remember the rope's own working load limit sits below the clamp rating.
- Inspect the rope end before every use: a frayed or kinked end seats badly and will not develop full face contact.
Working practice on tower
Feed the rope into the cavity until the end passes the jaw by a hand's width, so the pull does not start on the last few centimetres. Close the jaw and take up slack slowly; the self locking link converts haul tension into jaw pressure, so the clamp tightens as the pull builds. On long pilot rope runs, mark the rope at the clamp position so the same section is not loaded repeatedly on the same job. After release, check the rope for crushed strands where the jaw was seated.
Before it leaves the workshop
- Jaw cavity checked for squareness and for tooth condition.
- Link mechanism cycled under no load to confirm free movement.
- Load class and rope window checked against the item number.
- Plywood case packing, 800 PCS per month supply capacity.
Data statement
The three item numbers, rope windows, rated safe loads and weights above are taken from the current SKS datasheet. This page does not claim a service life figure, does not assert the clamp suits round rope, and does not name a certification beyond the ISO entry in the attribute table. Where a project requires a proof load test on the clamp, request it with the enquiry.
Questions from buyers
Can I use it on round steel rope?
No. The cavity is cut for flat or square braided profile. A round rope needs a grooved jaw clamp.
What does the SKS-5 weigh?
6.5KG net, with a 50KN rated safe load and a 13-16mm rope window.
How is the clamp attached to the puller?
Through the rear pulling eye on the frame. Confirm the shackle size against your haul line before the job.
Trade terms?
1 PCS minimum order, L/C or T/T, 3-7 days for stock.
